Layer 2 to Teraco
- Connect a remote site to Teraco Data Center
- Cross Connect setup virtually at Teraco. (Physically for special cases)
- Symmetrical link speed
- Fast installation
- Local support
- Layer 2 link is handed over on a VLAN
- Connect a remote site to Teraco Data Center
- Cross Connect setup virtually at Teraco. (Physically for special cases)
- Symmetrical link speed
- Fast installation
- Local support
- Layer 2 link is handed over on a VLAN
With our Layer 2 to Teraco service, you can establish a secure and direct connection, bypassing the public Internet. Connect seamlessly from any point on the Jenny Internet wireless network in Eswatini to Teraco at 5 Brewery Street, Isando, Johannesburg
At Teraco, we can assist in setting up an interconnection, whether physical or virtual, that strictly adheres to Teraco's standards. With swift deployment and backed by our local technical support, your Layer 2 to Teraco connection will be up and running in no time.
With our Layer 2 to Teraco service, you can establish a secure and direct connection, bypassing the public Internet. Connect seamlessly from any point on the Jenny Internet wireless network in Eswatini to Teraco at 5 Brewery Street, Isando, Johannesburg
At Teraco, we can assist in setting up an interconnection, whether physical or virtual, that strictly adheres to Teraco's standards. With swift deployment and backed by our local technical support, your Layer 2 to Teraco connection will be up and running in no time.
Easy. Secure. Direct.
Connectivity cost
See below line speed options. Please choose your location for accurate pricing.
Cost is the service price p/m inc VAT.
Layer 2 to Teraco speed |
Price price p/m incl. VAT |
|---|---|
| 200 Mbps | E 169,999.00 |
| 100 Mbps | E 94,599.00 |
| 50 Mbps | E 38,999.00 |
| 20 Mbps | E 13,999.00 |
| 10 Mbps | E 9,699.00 |
| 5 Mbps | E 6,299.00 |
Ready to get Layer 2 to Teraco?
We aim to satisfy...no matter where you are
FAQ
Here are the most frequently asked questions about Layer 2 to Teraco.
If you have any additional questions don't hesitate to speak to us.
The client is responsible for both the cost and the ordering of virtual cross-connects at Teraco. Orders for these can be placed through Teraco's ACX portal.
If a physical cross-connect is needed, it must be specifically requested and will be granted on a case-by-case basis by Jenny Internet.
The client-side equipment will be installed between 1 and 7 working days, as well as the time it takes Teraco to install the cross-connect.
The standard MTU is 1500.
- Jumbo MTU sizes are also available upon request, but please note that these links will cost more and might be less resilient due to single points of failure.
National call centre, 7 days a week with three levels: Support, Advanced Support, and Technical.